Rendered at 07:12:58 GMT+0000 (Coordinated Universal Time) with Cloudflare Workers.
II2II 1 days ago [-]
Towards the end of the BBS era, I was trying to reach some of my old favourite haunts. Most of the calls resulted in a number not in service message coming over the speaker (which is useful in its own right), but one resulted in a perplexed and upset person picking up. I picked up the phone and explained that she ended up with the phone number of a once popular BBS. While she probably didn't like the answer, she was thankful to learn that all of those calls by screeching machines weren't from someone trying to harass her.
Those speakers were there for diagnostics of various types. One of them was figuring out when a person picked up on the other end.
samtheDamned 10 hours ago [-]
I fax documents a lot for my job and one day I sent a fax to a telephone number instead of a fax number by mistake and through the printer I could hear someone pick up on the other end: "hello? Hello? click". Funny to imagine the same happening through a modem.
rob74 21 hours ago [-]
Yeah, if you're trying to transmit data over a system originally designed for audio communication, it totally makes sense to be able to actually hear what's going on. With DSL (which works in parallel with the voice functionality without affecting it, but eventually replaced it anyway), the speaker wasn't needed anymore.
Ekaros 20 hours ago [-]
Well DSL would not have been audible anyway as it uses band which is over 30 kHz. The filters were more so to stop interference between the two bands.
kqr 1 days ago [-]
The general name for this is mechanical sympathy. Humans have advanced sensory processing abilities, and if we design systems that use them, the performance of the humans operating the system improves. It improves for the simple reason that richer feedback leads to a better understanding of the state of the system, which in turn lets the operator predict the effects of their actions more accurately.
I think we could be a lot better at using human sound, visuals, and spatial navigation abilities in understanding software systems too, but I've never gotten around to implementing anything despite plenty of ideas.
My latest experiment is using tones and/or speech synthesis artifacts to get insight into LLM agent operation -- ongoing reasoning, tool call success/failure, etc. Still haven't really dialed it in (hah!) to be useful yet.
brainwipe 20 hours ago [-]
While mechanical sympathy is definitely a thing - modems were audio devices and so fault finding had always been audio. Everyone knew about connection clicks, what to do when there was no dial tone, hearing someone speaking meant the line was in use, the beeps you got when you connected, connection refused or connection waiting and then the hiss of data once the connection was successful. There were no other sensory signals on our phone at home. I knew one person that had a red light to show the line was in use, but that felt space age, no-one else had that and my dad worked for British Telecom!
greazy 9 hours ago [-]
What's your opinion on the flat design that has become this norm in software UI?
Gravityloss 18 hours ago [-]
There could be some sort of visualization or auditory status indeed to help dealing with LLM:s. It seems that everybody's just copying the textual interface.
dolmen 17 hours ago [-]
> I think we could be a lot better at using human sound, visuals, and spatial navigation abilities in understanding software systems too
Visual:
- icons
- sparklines
We don't have sounds anymore because of open floor offices.
eternauta3k 1 days ago [-]
A bit like abacuses and bicycles, not calculators and cars.
flancian 21 hours ago [-]
Krakauer from the Santa Fe Institute calls this distinction, IIRC, complementary vs adversarial cognitive artifacts. Navigating by reading a map versus relying on GPS navigation is my other go-to example.
ssl-3 1 days ago [-]
I used the modem speaker for all kinds of things in the BBS days. To name a few:
- Monitoring to minimize DTMF duration (S11 register, IIRC) and maximize redialing speed[1]
- Doing the same thing with dialtone and busy tone detection times
- Recognizing BBS callers by the unique sound of their modems, and using this to be annoying
- Surprising other BBS sysops who were themselves trying to call out, by issuing an ATA and dropping them into my BBS's login screen when I heard dialing instead of busy, ringing, or carrier tones
- Wardialing (I gave up on that forever when the voice from the machine said "911, what is your emergency?" and the usual automated hang-up-and-try-different-random-number routine did not disconnect the call, and instead produced an increasingly-agitated 911 operator)
[1]: A firmware update to the SupraFAXModem v.32bis allowed this timing to be so tight that the phone switch would miss digits, so tuning was in order
Quarrel 1 days ago [-]
I too tuned my dial tones as short as the exchange would allow. BBSes used to give us busy signals all the time, so modems would redial on a busy signal. It would dial and hang up silly fast, then redial. (The delays by default were not super short between redials, but again, just a value to tune)
A major commercial radio station used to have give aways of music- they’d say they will be “opening the lines soon, first 20 callers win!” My modem was very good at reliably getting me in the first 20 :)
Of course that wouldn’t work without me sitting next to it and a speaker in it!
StanislavPetrov 8 hours ago [-]
>BBSes used to give us busy signals all the time, so modems would redial on a busy signal. It would dial and hang up silly fast, then redial.
I remember this well, and it was much more tedious in the days of pulse dialing!
ssl-3 7 hours ago [-]
Mmmm. Ramping up pulse dialing rates, for fun and sport. Just crank the dial back 'round a little faster than the spring-return wanted to do on its own. If you get the rate just right, then it calls the house that you intended but does it far faster than normal. Too fast, though, and it calls somewhere else instead.
Which reminds me: During the last of the days of the mechanical phone switch, I found that if I dialed a telephone number slow enough and paid attention to the gaps between the pulsed digits, I could hear things through the phone. Faint beeps and boops, sometimes people talking as if very distantly -- or sometimes, whole lots of them like the subdued din of a cocktail party. It'd time out after a short period and subsequent attempts would land in a different part of the switch, with different sounds.
No idea if it worked with DTMF; that was an extra-cost item that we did not subscribe to at that time.)
weinzierl 23 hours ago [-]
All these answers just say what you would assume by applying common sense without any sources or any deeper justification.
I'm sorry I can't you give any of these either but I can give you a completely different explanation which makes a lot more sense to me (having lived at the time).
Early modems were so called acoustic couplers. That meant that they did not connect electrically to the telephone network but acoustically. Mechanically they were a bay you put the handset in and it had a microphone opposite the speaker and speaker opposite the microphone.
So, the speaker was already there[1] when (pure) modems became popular, it's just that the microphone disappeared over time.
[1] And so was all the software infrastructure to support it, like ATM and ATL commands.
mjg59 22 hours ago [-]
There was no good technical reason for acoustic couplers, since they inherently created an additional analogue jump between the phone and the modem. But phone companies argued you couldn't plug anything they didn't provide into their network, and so this was a solution that allowed you to continue using the phone company provided phone.
weinzierl 21 hours ago [-]
Apart from that they were somewhat convenient for home use. Easy to install, easy to use temporarily in a world where most homes just had a single line that had to be shared for voice and computer use.
pimlottc 15 hours ago [-]
They also looked cool in movies
22 hours ago [-]
simonebrunozzi 10 hours ago [-]
Yep.
glimshe 23 hours ago [-]
I love the Internet (here we are!), but the BBS era ruled. The one thing I'd like my children to experience from the early computer days. Lifelong friends (talked to one of them last week), girlfriends, pirated software, online text games, calling people in real life by their handle... Oh, the memories.
It was the Discord of the 90s.
zavec 22 hours ago [-]
I really wish I had been born 10 or 15 years earlier so I could have experienced it.
mikewarot 20 hours ago [-]
I was visiting Ward Christensen at his home, and he was showing me his BBS, "The Ward Board", and someone was online at the time... after looking at the monitor, and seeing what it was doing, he said "Oh, that's name of user, he's a twit" right before he hit the switch disconnected him.
Unfamiliar with the word, I asked "What's a twit?"
He said... oh, a person that likes to talk online too much, and takes up all the system's time. (There was only one phone line, so of you were on it, nobody else could be)
Years later, I remembered this when I first encountered Twitter. ;-)
Each era has its appeal. I'm sure my children will remember the good old days of Roblox and game modding with buddies on Discord. It's possible that if today's teenagers went back to the BBS days in a DeLorean, they would miss their phone and find it boring.
mitxela 21 hours ago [-]
I remember Garry's Mod and the Wiremod forums.
1/5
oivaksef 1 days ago [-]
Having lived through those years and the many different ways things can go wrong, I can't imagine not having the speaker.
j45 1 days ago [-]
It's the same as why does a phone have an earpiece.
DougN7 1 days ago [-]
It let you know if you accidentally called the wrong number because you would hear “hello?” before the screeching started.
paulstovell 1 days ago [-]
As a teenager trying to dial in to chat with friends on MSN Messenger at midnight, it was a terrible design feature. Could never sneak past parents!
As a parent now, I wish my kids devices had such a feature.
lm411 1 days ago [-]
ATL0
throwawaysoxjje 21 hours ago [-]
ATM0 defaulted the speaker to off
ssl-3 14 hours ago [-]
ATM0 to disable the speaker temporarily
AT&F0 to set that as default :)
smilespray 1 days ago [-]
The wifi speaker! Log on to the dulcet tones of QAM modulation.
curiousObject 1 days ago [-]
As well as all the other good reasons: modems had speakers because they COULD have speakers, because modems were connected to a network which was designed to safely transmit human-audible analog sound waveforms, which is exactly what cheap speakers are designed to emit.
If we directly connect a speaker to a different data network format, such as Ethernet, we probably will hear nothing useful. Maybe some clicks and pops, or the smell of a blown speaker.
mrheosuper 1 days ago [-]
>Adding a speaker was cheap and easy. The additional parts were standard, reliable, and inexpensive.
I miss that era. Now if a mlcc can be cut to save a fraction of cent, it sure will be.
soneil 11 hours ago [-]
There's an anecdote about this in "Where wizards stay up late";
> At one point, the NCC staff picked up on a particular modem that appeared to be malfunctioning whenever the auto-dialer ran its check. Someone suggested placing a call through the auto-dialer to the troublesome modem, while a technician listened in; perhaps he could diagnose the signal coming back. So he placed the call, listened for the modem to pick up, and heard an angry voice on the other end of the line. Before slamming down the receiver, the voice is reputed in countless retellings to have said, “Hey, Martha, it’s that nut with the whistle again!”
jleyank 2 days ago [-]
Sound let you monitor progress and success/failure. It also provided some security against a program phoning home on its own (as long as the speaker was on).
jrmg 1 days ago [-]
And not just binary success or failure - you also got to know the handshake sound and could predict if it was successfully connecting at high speeds or not - and so quickly hang up and try again if it was going to be slow.
nextaccountic 1 days ago [-]
Once I dialed the number of my grandma with my modem and my uncle answered the phone. So it also guards for when you inserted the wrong number and some person is actually on the line, and not a computer
jwrallie 20 hours ago [-]
My first PC was an IBM Aptiva from around 1996-97 that had a modem + sound card combo ISA board called Mwave. It was a 28.8 kbps modem, and instead of a low-quality buzzer, the call audio would come from the computer speakers. It was the exact card shown in the Wikipedia page [0].
I was still using a 56.6 kbps modem long after with a Windows XP era machine, it sounded much worse, and usually had a longer negotiation beep sequence that ended up with an actual speed a little bit short of its maximum.
I will never forget how funny it was when I was maybe 10 years old and my older sister got a call from a friend, I played with the modem software on our windows95 pc and somehow accepted the call on the modem, and suddenly we had a confused “Hello??” coming out of the modem speakers.
browningstreet 1 days ago [-]
When that high pitch squeal emanated from the modem speaker you’d run across the room and start typing at the BBS because if you didn’t, it would timeout and hang up on you.
Also, if there were issues connecting, you could get a sense from the sounds. Sometimes it told you there were hardware issues afoot and you’d be better off taking a BBS out of the dial rotation for the evening.
(You could redial a group of BBS’ to increase your odds of connecting, as opposed to redialing a singular BBS continually…)
russfink 1 days ago [-]
Connection protocol codependency: the human follows along to ensure the connection is good because goodness help us you can’t trust the modem to figure it out and get it right every single time alone.
mannyv 15 hours ago [-]
Old modems had speakers so you could hear the protocols training up.
I still remember the 'bung bung' of either the f.fast or the other 56k protocol.
tomkarho 20 hours ago [-]
Modems have speakers because they must scream and have no mouths.
Mashimo 20 hours ago [-]
Teenage me was amazed when I found out that I could add an old headphone cable to the 56k modem in order to silence it.
devilbunny 17 hours ago [-]
ATM0 never popped up?
I quickly discovered ATS0=0 since most modems of the era (mid 80s)defaulted to answering on first ring.
For those who grew up after modems: AT began all commands to the modem (well, all that used the Hayes command set, so pretty much all of them after 1983 or so). Mx was sound level on speaker - 0 for silent, 1 for sound until carrier detect, 2 for always on. S set register to value; S0 was number of rings before auto-answer, so S0=0 meant never answer. You could chain these, so ATM0S0=0 is valid.
spl757 1 days ago [-]
I could tell by the sound of the handshake what baud it was negotiating.
edit to say
CONNECT 9600
that was elite back in the day.
edit 2: the sound was completely optional, and could be toggled on and off with an AT command.
ChrisArchitect 2 days ago [-]
(2019) OP
If you're going to be posting old things, add dates to them please
Skyfall106 2 days ago [-]
my bad <3
rapist 1 days ago [-]
did modems change between 2019 and now?
Mashimo 20 hours ago [-]
It's one of the unwritten rules on HN to add dates to older articles.
GenerWork 1 days ago [-]
Extremely cool, thanks for sharing! Always interesting to see how people go about solving UX issues with various pieces of physical hardware.
globular-toast 1 days ago [-]
I wasn't really allowed to use the internet as a teen because it cost money. My parents would never pay for a flat subscription. Luckily I figured out you can disable the speaker in the driver settings, at least you could with ours. Then I preceded to spend half of my teenage life awake at night on the internet after everyone else had gone to bed. This screwed up my sleeping patterns for years.
ehnto 23 hours ago [-]
They still do, at least some dev boards do.
timonoko 23 hours ago [-]
I had weird multipass modem. It had filters so that you could have 300 bits computer line and telephone conversation at the same time. Not totally useless in remote maintenance type situation.
gjvc 14 hours ago [-]
so you can hear it dial, ring, and pick up -- pretty lousy question
Those speakers were there for diagnostics of various types. One of them was figuring out when a person picked up on the other end.
I think we could be a lot better at using human sound, visuals, and spatial navigation abilities in understanding software systems too, but I've never gotten around to implementing anything despite plenty of ideas.
My latest experiment is using tones and/or speech synthesis artifacts to get insight into LLM agent operation -- ongoing reasoning, tool call success/failure, etc. Still haven't really dialed it in (hah!) to be useful yet.
Visual:
We don't have sounds anymore because of open floor offices.A major commercial radio station used to have give aways of music- they’d say they will be “opening the lines soon, first 20 callers win!” My modem was very good at reliably getting me in the first 20 :)
Of course that wouldn’t work without me sitting next to it and a speaker in it!
I remember this well, and it was much more tedious in the days of pulse dialing!
Which reminds me: During the last of the days of the mechanical phone switch, I found that if I dialed a telephone number slow enough and paid attention to the gaps between the pulsed digits, I could hear things through the phone. Faint beeps and boops, sometimes people talking as if very distantly -- or sometimes, whole lots of them like the subdued din of a cocktail party. It'd time out after a short period and subsequent attempts would land in a different part of the switch, with different sounds.
No idea if it worked with DTMF; that was an extra-cost item that we did not subscribe to at that time.)
I'm sorry I can't you give any of these either but I can give you a completely different explanation which makes a lot more sense to me (having lived at the time).
Early modems were so called acoustic couplers. That meant that they did not connect electrically to the telephone network but acoustically. Mechanically they were a bay you put the handset in and it had a microphone opposite the speaker and speaker opposite the microphone.
So, the speaker was already there[1] when (pure) modems became popular, it's just that the microphone disappeared over time.
[1] And so was all the software infrastructure to support it, like ATM and ATL commands.
It was the Discord of the 90s.
Unfamiliar with the word, I asked "What's a twit?"
He said... oh, a person that likes to talk online too much, and takes up all the system's time. (There was only one phone line, so of you were on it, nobody else could be)
Years later, I remembered this when I first encountered Twitter. ;-)
Edit: I'm now watching Ward's full interviews for the BBS Documentary at https://archive.org/details/20020216-bbs-christensen
1/5
As a parent now, I wish my kids devices had such a feature.
AT&F0 to set that as default :)
If we directly connect a speaker to a different data network format, such as Ethernet, we probably will hear nothing useful. Maybe some clicks and pops, or the smell of a blown speaker.
I miss that era. Now if a mlcc can be cut to save a fraction of cent, it sure will be.
> At one point, the NCC staff picked up on a particular modem that appeared to be malfunctioning whenever the auto-dialer ran its check. Someone suggested placing a call through the auto-dialer to the troublesome modem, while a technician listened in; perhaps he could diagnose the signal coming back. So he placed the call, listened for the modem to pick up, and heard an angry voice on the other end of the line. Before slamming down the receiver, the voice is reputed in countless retellings to have said, “Hey, Martha, it’s that nut with the whistle again!”
I was still using a 56.6 kbps modem long after with a Windows XP era machine, it sounded much worse, and usually had a longer negotiation beep sequence that ended up with an actual speed a little bit short of its maximum.
[0] https://en.wikipedia.org/wiki/Mwave
Also, if there were issues connecting, you could get a sense from the sounds. Sometimes it told you there were hardware issues afoot and you’d be better off taking a BBS out of the dial rotation for the evening.
(You could redial a group of BBS’ to increase your odds of connecting, as opposed to redialing a singular BBS continually…)
I still remember the 'bung bung' of either the f.fast or the other 56k protocol.
I quickly discovered ATS0=0 since most modems of the era (mid 80s)defaulted to answering on first ring.
For those who grew up after modems: AT began all commands to the modem (well, all that used the Hayes command set, so pretty much all of them after 1983 or so). Mx was sound level on speaker - 0 for silent, 1 for sound until carrier detect, 2 for always on. S set register to value; S0 was number of rings before auto-answer, so S0=0 meant never answer. You could chain these, so ATM0S0=0 is valid.
edit to say
CONNECT 9600
that was elite back in the day.
edit 2: the sound was completely optional, and could be toggled on and off with an AT command.
If you're going to be posting old things, add dates to them please